Go to the next Load Master section!

Load Control Power Curve


       A - Normal Operating Range                                             .
B - Load Master Operating Range (40 - 60 RPM's Lower)

(Figure A)    Normal operating range will vary from operator to operator depending on experience level. 

(Figure B)    The Load Master operates at lower RPM's than a human operator is able to (40 -60 RPM's lower).  It also operates in a much tighter RPM range than a human operator.  This means more load on the machine, thus more acres cut, 20% to 100% more acres depending on operator experience.  Grain loss is at or below incurred by human operator.  Correct selection of load range on the Load Master eliminates slugging and system stress. 

If you have questions or comments, email us by clicking here!

1-877-648-8007               Fax: 406-761-8151